My photo
Netherlands
We are the Trashers, a Dutch Car Club. We build, modify, kustomize and drive all kinds of old vintage US cars. So what's the deal ? Well...since the 1920's speed addicts try to push their vehicles to the limits on salt flats and dry lake beds like El Mirage and Bonneville, USA. And that's exactly where we want to go too!
But...instead of using a high-dollar, computer-controlled car we like to break a land speed record like they did in the fifties, using a vintage flathead engine for power and the best possible body to put this in; an all aluminum fighter airplane droptank... Yes you heard it right ! We're planning to go to the salt lakes with our bellytank racer!!!
And that's where you as a reader come in. We sure could do with some funds!
So, if you like speed, vintage cars and share the same enthousiasm in breaking a speed record as we do...
Join in and make a donation to our bank number on the right. Or buy yourself a "Trash-Can" t-shirt or some cool stickers. We'll keep you informed about the progress of 'your' project!
Thanks for making our dream come true!!
Trashers Car Club

Tuesday, July 14, 2009

What do we need ? Parts, parts, parts and then some !

Building a racecar from the ground up requires lots of skills, patience, money and parts. We've got the skills, we more or less have the patience, and money is slowly coming in (we could do with some more, winkwink, nudgenudge).

What we need on parts is a long list ! Well, at least we have the tank itself !

If you can help us out with these parts, please contact us thru this blog !

9"Ford third member, 1:2.80 gear ratio or somewhat in that region.
clutch housing for a M40 gearbox of a Volvo Amazon
cool airplane style steering wheel
race style battery
power shut off switch
inertia fuel stop
gauges
seatbelts suitable for racing, six point harnass
fire extinguishing system or parts for it
15" steel rims, 4-5 inches wide, 5x4.5" wheel stud pattern
18"steel rims, 4-5 inches wide, 5x4.5" wheel stud pattern
18" tires, 4-5 inches wide, tallest available.

We will add parts in the near future for sure !

1 comment:

  1. We need an engine as well!
    However, what's the record for a Flintstone-style lakester...?

    ReplyDelete